Skip to main content
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Place the heat-sink assembly back on its hinges.

Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.

Replace the floppy drive's ribbon cable (if you have one).

NOTE: Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.

Clean the heat sink before reassembly

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.