Skip to main content
도움말
6단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Flip the iPhone back over and insert a plastic card between the case side of the battery and the rear case.

Do not pry against the logic board or you may damage the phone.

Avoid prying at the top left near the volume controls, or you may damage the volume button ribbon cable.

Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

Press the card in farther to break up the adhesive behind the battery.

Alternatively, a piece of dental floss may be used to separate the battery from the rear case. A stronger alternative to dental floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Thread the floss or string behind the upper battery corners, bring the ends together, wrap them around a folded cloth, and pull evenly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.