Skip to main content
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unless the repair is at the very bottom edge of the garment, leave the drawcord intact. If you can work around it, it will be easier than removing it and sewing it back into place.

When reassembling your jacket, try to sew over the existing holes to keep from creating new openings which might allow down to escape. If possible, steam your jacket once you have finished the repair. This will help close any stitching holes and prevent additional loss of the down material.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.