Skip to main content
도움말
2단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Unscrew 8 T10 screws from the cooling unit. NOTE: these screws are acctually allen keys. The prefered tool will be long handled allen keys. t10 are 2.74mm (closest allen key is 2.5 or 3mm) and t15 are 3.27mm(closest allen key is 3mm and 4mm). You may strip your tool or the actual screws themselves. Use a set of high quality long handled allen keys.

The screws are somewhat hidden, so they cannot be see in the picture.

To visualize the location of the screws look 3 steps ahead.

The screws will loosen but will not come out, they are designed to loosen the unit, but remain in place.

The last two images show another version of the LCS (out of the computer) in the G5 with off-center views to show the 8 screw holes.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.