Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use a multimeter to test the potential difference across the components. You will have to reinstall the batter and turn the device on to do this.

Put one of the pins on each side of the component. Read the value on the meter.

Each resistor has a predefined value that can be found using this page. Compare the results to the expected values.

The capacitors have there properly functioning values printed on them.

If any values vary replace the component.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.