Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

First do a visual check. Looked for cracked solder or damaged components.

The image on this page shows a wire who's solder has completely detached from the board.

To fixed cracked or detached solder, use the soldering iron to heat the solder already there until it flows and becomes completely attached to the board.

To replace damaged components use the iron to remove and replace them.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.