Skip to main content
도움말

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 32 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage.

Make sure the suction cup is firmly attached to the front panel assembly near the home button.

While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case.

With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup.

Take your time and apply firm, constant force. The front panel assembly is a much tighter fit than on most other devices.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.