주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Re-install the diaphragm and test the actuator again.

After cleaning and greasing the diaphragm held a solid 16Hg vacuum for several minutes with no change. There must have been some debris under the edge of the diaphragm letting air in slowly. Now that the leak has been fixed it can be re-installed.

If cleaning and greasing the diaphragm does not stop the leaks, or if the diaphragm is visibly cracked or torn, the actuator will need to be replaced with a new or good/tested used actuator.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.