주요 콘텐츠로 건너뛰기
도움말
11단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector.

Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.

You can use the black rubber tube or electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.