주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The rear cover on this style of motor is held in place by four rivets that are compressed in to holes in the gear housing.

The rivets need to be drilled out just a little bit to weaken them enough to pry off the cover. Begin this process by drilling the rivets about 1/4" deep with a small drill bit, smaller than 1/8".

Repeat with all four rivets.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.