주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With drilling completed you will need to very thoroughly clean the gear housing to remove any metal shavings along with the old grease.

To avoid getting water in the lower electric motor housing first unscrew the two screws that hold the electric motor housing to the gear housing.

The two parts of the device can then be separated by pulling them away from one another. The worm gear will come out of the housing.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.