Skip to main content
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With the screw removed, pull the turn signal straight out away from the front of the car.

Do not pull the signal out and away from the headlight housing without first pulling it forwards as shown in the first picture. There are plastic tabs that fit in the openings highlighted in the second picture. These tabs can be easily broken if this step is not followed.

Once the tabs are clear of their slots you can move the tail light away from the headlight housing to get access to the bulb socket and wiring.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.