주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

You can now see the trunk actuator. It connects to the lock mechanism by the metal rod with a spring.

To remove the actuator begin by removing the two hex head screws. They should be 8mm heads.

Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).

Finally, pull the metal armature of the actuator off of the lock mechanism. It pulls off in the direction of the vacuum actuator body.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.