주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To remove your motor mounts you will need to raise, and support, your engine with a bottle jack.

Before you can do this you will need to remove the bolts that hold the engine to the mounts. This is done from below the car.

The bolts are allen head bolts; you will need an 8mm allen head socket. It should be a 1/2 inch drive socket as you will want a large wrench for leverage. These are often in very tightly.

The bolt on each mount is located up inside a recessed area as shown.

Remove the bolt and set it aside.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.