주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the lower 10mm nut on your engine shocks so the shock can move up as you jack up the engine.

In order to loosen this nut you will need to keep the shaft on the bottom of the engine shock from turning with it.

Just above the large metal washer on the shaft there is a flat area where a 7mm crescent wrench will fit on the shaft to hold it. It can be seen in this picture from above the car.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.