Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the 10mm nut on the bottom of the shock.

Note that if you try to remove this nut you cannot at first as the shaft on the shock turns along with it.

There is a flat area on the shaft, just above the large metal washer on the bottom portion of the shock. Place a 7mm crescent wrench on this to prevent the shaft from spinning. Pictured from above.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.