주요 콘텐츠로 건너뛰기
도움말
15단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 17개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Make sure the battery is disconnected before you disconnect or reconnect the cables in this step.

Use a plastic opening tool or a fingernail to disconnect the LCD cable connector.

The LCD and Digitizer connectors are on the same cable assembly, so prying the LCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.

When reassembling your phone, the LCD cable may pop off its connector. A blank screen, or white lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.