Skip to main content
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Here is a view of the assembly with the screws removed.

Insert some sort of prying tool between the tail light assembly and the body, just below the crease in the body and pry to the rear of the vehicle. a snap will be felt/heard as the plastic stud releases

Move the prying tool to above 1 1/2 inch above the bottom of the assembly. Insert it between the assembly and body and gently pry toward the rear of the vehicle. This should free the second stud.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.