주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Next use a large ratchet wrench with a 19mm socket to remove the two bolts that hold the caliper to the steering knuckle.

These bolts are in very tight, and had thread locker on them from the factory, so you may need a very long wrench or a breaker bar in order to get enough leverage to remove these two bolts.

Hold on to the caliper as you remove the second of the two bolts so it doesn't fall when you remove the bolt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.