주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Carefully wedge a plastic opening tool between the hinge on the body of the phone.

Be sure to insert the wedge into the right hinge when looking down onto the phone, as seen in the picture.

Slowly pry the hinge from the body, as shown in the second picture. Set the phone down after when finished with this step.

The phone may also be pried apart with your hands.

Because you are replacing the display screen with a new one, it is ok if the connector strip tears, because the new display screen will have its own connector strip.

Next, slide the connector cable out of the slot on the back side of the phone and the screen will be disconnected from the key pad body.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.