메인 콘텐츠로 스킵하기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Heat up the glass for 3-5 minutes. I chose to do it for 4 minutes.

You only need to use your heatgun on the lowest setting. I wouldn't recommend using a hair drier as it doesn't get very hot.

You must be careful when using the heat gun on this device. If the device is heated up too much then it may melt the digitizer and cause discoloration. If you start to see any discoloration then shut off the gun immediately.

This procedure softens the adhesive that holds the glass to the screen assembly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.