Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use the following steps to install the old trackpad into your new upper case.

Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.

Place the trackpad back into its void in the upper case, being sure the lower tabs are inserted underneath the keyboard side of the upper case.

Be sure the trackpad ribbon cable is not pinched between the trackpad and the upper case.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.