주요 콘텐츠로 건너뛰기
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.

With the heat gun set to low, start by heating the front display bezel near the upper left corner of the display panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.