주요 콘텐츠로 건너뛰기
도움말
14단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Insert a plastic opening tool between the metal LCD frame and the front bezel.

Be sure you are prying between the metal LCD frame and the front bezel, not between the metal LCD frame and the LCD.

It may be necessary to reheat this area until the adhesive yields enough to insert the edge of a tool.

Use the flat end of a metal spudger to gently pry up the adhesive securing the metal LCD frame to the front bezel, taking special care not to scratch the LCD panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.