주요 콘텐츠로 건너뛰기
도움말
15단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

While it is still inserted between the metal LCD frame and the front bezel, run the edge of your metal spudger along the top edge of the display to separate the adhesive securing the two pieces together, heating the area you are working on with a heat gun as necessary.

If the adhesive is hard to separate, use a heat gun to lightly heat the area you are working on.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.