Skip to main content
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Peel the back off of the new traction pad to reveal the adhesive.

When placed, the traction pad should be about an inch away from the rear binding.

To avoid creating air bubbles, start with one corner of the pad and roll the rest down.

Press down firmly to help it stick to the board and remove any air bubbles that may have occurred.

Give the adhesive a minimum of 12 hours to dry before use.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.