주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In the following steps you will use a heat gun to soften the adhesive securing the black plastic frame to the front glass. Do not allow the stream of hot air to contact the thin rubber strip around the outer perimeter of the front glass as it may melt, permanently deform, and lose texture.

Use a heat gun to gently heat the plastic display frame near the home button from the inner side of the front glass panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.