Skip to main content
Help
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To separate the ribbon cable side of the display bracket, begin by heating near the lower left corner of the panel (as viewed from the front of the iPad).

Carefully separate the lower edge of the ribbon cable side of the frame until you reach another area where rubber connects the frame to the glass panel.

Repeat the process outlined in previous steps to cut through the rubber "dots" connecting the two pieces.

Be careful when separating this side, as there is fragile ribbon running beneath the frame.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.