주요 콘텐츠로 건너뛰기
도움말
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat.

Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.

Pry the final section of the plastic display frame away from the front glass.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.