Skip to main content
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Replace a fuse only with a fuse identical in type, voltage rating, and current rating as specified by the back panel fuse rating label or the Fluke 77 Series III Service Manual. Inserting the wrong replacement fuse could create a fire hazard.

Locate the fuses near the bottom left corner inside the device.

Take note of which fuses belong in which location before removal. They are NOT interchangeable.

The .440 Amp fuse is located in the upper left hand fuse holder.

The 11 Amp fuse is located in the lower right hand fuse holder.

Lift the rounded edge of the fuse with one finger until that side is completely out of its holder.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.