Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the two, 20mm silver screws holding the circuit board in place.

Before removing the circuit board, you will need to disconnect the blue ribbon cable, two orange ribbon cables, and a small connector (look at second image for where the small connector is).

The orange ribbon cables are held in place by a small locking mechanism. Lift the small brown tabs for easy disconnection.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.