주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before removing the hoses, the brake fluid on that caliper should be allowed to drain.

This is done through the bleed screw on each caliper. The following bleed screws are shown:

Front caliper bleed screw

Rear caliper bleed screw

Allow the fluid to drain by loosening the screw just two or three turns until the fluid is dripping quickly. Use a 9mm box end wrench for this job.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.