주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Now it's time to begin working on removing the soft rubber hoses.

They connect to the caliper, and then to the hard lines at a bracket on the car.

You can see here where it connects to the caliper on the rear driver's side. It will be similar on all four calipers.

This is how they connect to the two front hard lines. They are located near the top of the inside of the fender wells.

And this is how they connect to the rear hard lines. Soft line already disconnected in this picture. They are located just behind the fender well, accessible through an opening.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.