Skip to main content
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The upper A/C line, the one covered in foam, travels across the top of the housing. It attaches to the housing via a bracket, which acts as one of its mounts.

To start the removal of the housing you'll need to detach the A/C line from the bracket. It's held in place with a 10mm bolt and nut.

Place a 10mm socket on the nut side, and a 10mm box end wrench on the bolt side, and back out the bolt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.