주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

After the two long 13mm bolts are removed the first item that comes out is the bracket that attaches to the A/C line.

Note its orientation as you remove it and set it aside.

With the two radiator hoses disconnected and the hose clamp on the short lower hose loosened the thermostat housing should pull off the cylinder head and out of the car. If necessary use a small pry tool to gently pry it away from the cylinder head.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.