주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Using side cutters, cut the red and black wires connecting the battery to the printed circuit board just after the shrink wrap tubing.

Strip the ends of the wires attached to the printed circuit board 1/4 inch above the ends of the cut wires.

Solder the new battery to the stripped wires attached to the printed circuit board.

Wrap the newly soldered connections with electrical tape.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.