Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With needle nose pliers, gently bend back the metal tab at the bottom of the click wheel PCB so that you can release this board from the upper metal tab. Fold it away to the right and slide apart the ribbon cable from this board and place aside.

Then lift the LCD display away from the camera and again carefully remove two ribbon cables (boxed in blue) and place aside.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.