Skip to main content
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Allow a brief discussion of the design issue...

The seal for the upper elbow has a groove built in to it.

The neck on the air filter housing where this seal goes has a matching ridge.

This prevents the new seal from easily slipping on to the neck and it often gets pushed back in to the elbow, preventing a proper seal.

A potential fix for this will be addressed later in the guide.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.