Skip to main content
2단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

The battery is also attached to the circuit board by a cable. The cable is difficult to disconnect with both components in place. It's best to lift the circuit board out partially to give yourself more room to disconnect the connector.

The wire that is connected to the circuit board is connected by a plastic piece with two metal prongs.

Use the pointy end of the spudger to place in between the computer board and the plastic piece and gently pry the prongs away from the circuit board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.