메인 콘텐츠로 스킵하기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With a prying tool, carefully lift the plastic case covering the logic board and set aside.

NOTE: There may adhesive holding the bezel to the midframe. If it is difficult to pry off the bezel, heat it up around edges to soften adhesive. Do not pry on midframe hard at the top edge of the screen it will damage the LCD.

You need to place your prying tool in the space between the screen and the case and lift the plastic case towards the back of the phone. Be careful around the buttons.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.