메인 콘텐츠로 스킵하기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered.

Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire.

When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.

Repeat this process for each terminal on each speaker.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.