Skip to main content
도움말
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Rest the soldering iron on the battery pad to heat it up.

Once the pad is hot enough, begin adding solder.

If solder does not flow immediately when it comes in contact with the pad, remove it and allow the pad to heat up longer.

Apply a large gob of solder to the pad (as shown).

Tin the iron and return it to its stand.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.