Skip to main content
17단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

LEDs are polarized: one side of the diode is positive, the other is negative. It is typical convention for an LED to be manufactured with its positive lead longer than the negative lead.

Positive lead (longer)

Negative lead (shorter)

Insert the LED into the PCB as illustrated. Be sure to match up the positive lead of the LED (the longer one) with the positive pad on the PCB (marked with a "+").

Bend one of the leads down tightly. This serves as a securement so the part doesn't fall away while you solder.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.