Skip to main content
도움말
14단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 2 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

If you've already verified that your iMac is working correctly and are ready to seal it up, skip to Step 16.

Gently insert the display data connector into its socket on the logic board. Be sure to press it straight into the socket, and insert it completely.

Flip the display data connector lock down onto the socket.

Insert the display power connector into its socket on the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.