Skip to main content
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The front control panel is attached to the printer on both sides by a grey piece of plastic that runs on a track. Remove the control panel from the track by pushing it away from the track on both sides.

The ribbon cable on the left side of the control panel, also known as the ribbon cable, must stay attached to the printer. If the cable becomes detached the front buttons will not be responsive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.