주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 26 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Remove the front panel assembly.

During reassembly, wipe any dust or fingerprints off of the inside of the front panel assembly to ensure a clean display.

If you experience "ghost" or "phantom" touch input issues with your new display, this can be resolved by adding a layer of very thin insulating tape, such as Kapton (polyimide) tape, to the highlighted areas on the back of the panel. iFixit panels come with the proper insulation, and should not require the addition of any tape.

Without the proper insulation, these areas of the digitizer can ground out against other components, causing touch input malfunction.

The insulation is not visible to the naked eye, and is different from the foam dust barrier strips found on many iPads.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.