주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말

단계 유형:

끌어서 재배열 합니다

To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.

To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.