주요 콘텐츠로 건너뛰기
도움말
11단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Place the red probe on the positive terminal, and the black probe on the negative terminal.

If your range was set too high, you may not get a very accurate reading. Here the multimeter reads 9 volts. That's fine, but we can turn the dial to a lower range to get a better reading.

If you set the range too low, the multimeter simply reads 1 or OL, indicating that it is overloaded or out of range. This won't hurt the multimeter, but we need to set the dial to a higher range.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.