메인 컨텐츠로 가기
도움말
13단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

Remember that you'll be testing the resistance of the entire circuit. If you want to test an individual component such as a resistor, test it by itself—not with it soldered in place!

Plug the black probe into the COM port on your multimeter.

Plug the red probe into the VΩmA port.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.