주요 콘텐츠로 건너뛰기
도움말
14단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Switch on your multimeter, and set the dial to resistance mode.

Resistance is measured in ohms, indicated by the Ω symbol.

Most multimeters are not autoranging, meaning you will need to set the correct range for the resistance you expect to measure. If you're not sure, start with the highest setting.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.